In this second entry of the JWST MIRI and NIRSpec integration and test journal, we catch up with NIRSpec - the Near InfraRed Spectrograph, before it departs Europe for NASA's Goddard Space Flight Center (GSFC). NIRSpec is an instrument provided by ESA for the NASA-ESA-CSA James Webb Space Telescope (JWST).

The NIRSpec flight model's path to qualification and delivery has not always been smooth: in August 2011, inspection of the optical bench at EADS Astrium GmbH revealed three very thin cracks in the Silicon Carbide ceramic optical bench. These tiny cracks originated in bolt holes which are used to attach the corner posts of the instrument cover.

After further investigations, redesign of all the relevant bolted interfaces, re-qualification tests and the revision of some integration procedures, all NIRSpec sub-systems were disassembled from the damaged optical bench and, in November 2012, re-integrated and aligned to the carefully screened flight spare optical bench, getting NIRSpec back on track.

Once the integration was complete, NIRSpec was packed and, in December 2012, moved the 500m to the IABG test facility for cryogenic and vacuum testing.

The instrument was installed in a vacuum test chamber and, over a few days, it was cooled down to its operating temperature of close to -233 degrees Celsius - mimicking the conditions it will encounter in space.

These conditions were maintained for almost a month, while engineers and scientists tested the instrument to obtain key characterization and calibration data. The instrument was then warmed up to room temperature and air was allowed back into the chamber.

In February this year, NIRSpec was returned to the cleanroom at Astrium, where it was inspected to ensure that there had been no damage or changes in alignment during transport and testing.

The next step was the replacement of some hardware components. To enhance the performance of the instrument the optical bench kinematic mounts and a re-designed straylight baffle were successfully exchanged on the flight model.

The kinematic mounts are the three "feet" of NIRSpec. They will attach to the integrated science instrument module (ISIM) structure of the JWST payload module.

These feet have some flexibility, and ensure NIRSpec remains correctly aligned with the telescope, while still allowing for small movements resulting from the cool down and gravity release. The feet also support the 200kg instrument during the vibration of the launch. The original feet were replaced with a more robust set.

To stop stray light reflecting off the instrument and giving false measurements, an optically opaque baffle is required. During launch, very strong sound waves propagate within the instrument, and although the original baffle worked well in terms of stopping stray light, studies showed that NIRSpec's micro-shutter assembly (a novel micro electro-mechanical system which holds about a quarter of a million small shutters that can all individually be addressed to select scientific targets) was very sensitive to the pressure differences across the baffle.

A new baffle, which incorporates a labyrinth of openings to allow the passage of air during launch and depressurization, was manufactured and installed.

The next tests, performed at Astrium, were to simulate the vibration and sounds that will be experienced by the instruments during the launch of JWST onboard an Ariane 5. These acoustic and vibration tests were carried out over a period of about three weeks and were successfully completed at IABG in the second half of June, 2013.

Post test alignment checks were then completed in Astrium's cleanroom and, following confirmation that the instrument alignment remained within specifications, NIRSpec was packed and moved back to IABG where it is currently installed in the cryogenic chamber for a second short cryo-vacuum test campaign. The instrument was cooled-down and reached operating temperature by the end of July and is now ready for testing.

After these tests, NIRSpec will be returned to Astrium for final alignment and functional testing. NIRSpec will then be delivered to ESA and shipped to NASA's Goddard Space Flight Center (GSFC), where it will join MIRI in the Space Systems Development and Integration Facility (SSDIF) - the largest 'class 10 000' cleanroom facility in the world - for integration into JWST.