A High-Precision Test Bench for LISA Technology

For the first time, it has been possible to test laser measurement technology for LISA in laboratories almost under mission conditions. A team of researchers led by the Max Planck Institute for Gravitational Physics and the Institute for Gravitational Physics at Leibniz Universitat in Hannover, Germany, achieved the breakthrough with a novel experiment.

The work ties up with the LISA Pathfinder mission, which tested LISA technologies in space from 2015 to 2017. LISA is a planned observatory in space that will detect gravitational waves inaccessible on Earth.

A consortium of international scientists is currently developing LISA as a mission of the European Space Agency (ESA). With their experiment, the AEI scientists demonstrate the functionality of the LISA phasemeter, which will be the central measuring unit of the observatory.

Their experiment can also be easily extended for further testing and can thus verify other steps of LISA measurements observatory. Their experiment can also be easily extended for further testing and can thus verify other steps of LISA measurements and support the development of data processing for the mission.

"All components of the planned LISA space observatory must meet strict precision requirements to measure gravitational waves," says Dr. Thomas Schwarze, lead author of the article published in the renowned journal Physical Review Letters. "Creating conditions in a laboratory under which the enormous precision for LISA can be verified requires great care. For the first time, we can test an important part of LISA technology under almost realistic mission conditions in our laboratories and show that it works as intended."

LISA: A Gravitational-Wave Observatory in Space
LISA is scheduled to launch into space in 2034 as a mission of the European Space Agency (ESA). The mission will consist of three satellites that will create an equilateral laser triangle with each side approximately 2.5 million kilometers long. The distances of this formation flight in space are changed by a trillionth of a meter by gravitational waves.

To detect these tiny changes, instruments (phasemeters) in the LISA satellites monitor and measure the laser light exchanged between them. This measurement has to be performed with highest precision - like an extremely accurate microphone with low noise and low distortion - over a large range of 8 to 10 orders of magnitude.

Testing LISA Measurements in a Laboratory
In their article, the researchers describe a new experimental setup which, for the first time, enables laser-based LISA measurements in a laboratory under almost realistic mission conditions and use it to verify the accuracy of the phasemeter.

The setup consists of an optical bench which, due to its special construction, is highly precise and stable and thus eliminates all undesirable noise sources ten times better than previous experiments. The required LISA accuracy in the trillionth of a meter range can thus be achieved.

On the optical bench, three laser beams produced in a controlled manner are superimposed in pairs in order to obtain six new laser beams with precisely defined properties. By skillfully superimposing three of these mixed beams and measuring their properties with the phasemeter, its function can be precisely checked.

Successful Test Under Almost Realistic Mission Conditions
The phasemeter tested with the setup meets the mission requirements almost throughout LISA's entire measurement range. This successful test is the first under almost realistic conditions. It shows that with the new setup and with small modifications, further central components of the LISA mission can be tested under even more realistic conditions.

"It's crucial to understand all the details of the LISA mission precisely and to test them in advance in the laboratory," explains Prof. Gerhard Heinzel, leader of the research group for space interferometry at AEI Hannover. "Only in this way can we be sure that the complex mission will work as planned. Once the satellites are in orbit around the Sun, we can no longer modify the hardware."

Future Gravitational-Wave Astronomy with LISA
LISA will measure low-frequency gravitational waves with oscillation periods from 10 seconds to more than half a day, which cannot be observed with detectors on Earth. Such gravitational waves are emitted, for example, by supermassive black holes, millions of times heavier than our Sun, which merge at the centers of galaxies, the orbital movements of tens of thousands of binary stars in our galaxy, and possibly from exotic sources such as cosmic strings and the echo of the Big Bang.

Between December 2015 and July 2017, the LISA Pathfinder mission demonstrated other LISA components in space and showed that they exceeded requirements throughout the LISA measurement band.

ESA is currently conducting the Phase A system study with the international LISA consortium. A preliminary design of the space components is to be developed in preparation for the mission.

Research Report: "A Picometer-Stable Hexagonal Optical Bench to Verify LISA Phase Extraction Linearity and Precision,"

Related Links
Max Planck Institute For Gravitational Physics
Stellar Chemistry, The Universe And All Within It

Tweet

Thanks for being there;
We need your help. The SpaceDaily news network continues to grow but revenues have never been harder to maintain.

With the rise of Ad Blockers, and Facebook - our traditional revenue sources via quality network advertising continues to decline. And unlike so many other news sites, we don't have a paywall - with those annoying usernames and passwords.

Our news coverage takes time and effort to publish 365 days a year.

If you find our news sites informative and useful then please consider becoming a regular supporter or for now make a one off contribution.

SpaceDaily Monthly Supporter
$5+ Billed Monthly

paypal only

SpaceDaily Contributor
$5 Billed Once

credit card or paypal

Australia Designs Local Infrastructure for World's Largest Telescope
Sydney, Australia (SPX) Feb 26, 2019
A team of Australian engineers and scientists has designed the local infrastructure for the world's largest radio telescope - the Square Kilometre Array (SKA) - taking the billion-dollar global project one step closer to reality. The SKA will explore the universe in unprecedented detail, doing so hundreds of times faster than any current facility. Antennas will be located in both Australia and southern Africa. The SKA Infrastructure Australia consortium, led by CSIRO - Australia's national s ... read more