. 24/7 Space News .
AEROSPACE
USAFSAM operates only device for potential pilot height waiver
by Staff Writers
Wright-Patterson AFB CO (SPX) Dec 19, 2019

Jessica Barker, an aeromedical technician at the U.S. Air Force School of Aerospace Medicine, measures the standing height of a pilot candidate using the only official anthropometric device for measuring those who fall outside height standards. Seven measurements are collected and uploaded into a waiver system to determine if height for each candidate is truly an eliminating factor to fly manned aircraft. (U.S. Air Force photo by Richard Eldridge)

The United States Air Force School of Aerospace Medicine here operates the only official anthropometric device accepted by the USAF to determine precise measurements of pilot candidates who do not meet the standard height requirements to become pilots.

Medical flight standards experts in the schoolhouse, part of the Air Force Research Laboratory's 711th Human Performance Wing, collect seven measurements using this device, and initiate the waiver process to determine if height for each candidate is truly an eliminating factor to fly manned aircraft.

The current height standard for pilots is a standing height of 64-77 inches and a sitting height of 34-40 inches. The anthropometric measurements for the waiver consist of standing height, sitting height, buttock-to-knee length, sitting eye height, sitting knee height, sitting shoulder height, and arm span.

"We take these anthropometric measurements, upload them into the waiver system, and then we send the data to Air Education and Training Command," explained Dr. Charles Shurlow, a chief flight surgeon in USAFSAM. "AETC will take that data, and put it into WebPASS, the Web-based Pilot Accommodation Screening Software program. From these numbers, the system will inform the waiver approval authority on what airframes that person can fit in and fly safely."

In early 2000, the cockpits of each type of USAF aircraft were anthropometrically mapped to determine what body sizes can safely operate in each aircraft. This data was used to create the WebPASS program.

"It was an enormous effort," said Jennifer Whitestone, a biomedical engineer in the Air Force Life Cycle Management Center, also at Wright-Patterson Air Force Base in Ohio. "For each USAF aircraft, subjects of specific body sizes were measured against performance requirements for that particular aircraft."

Whitestone explained that these anthropometric dimensions were mapped to the ability to perform the required tasks, which are called accommodation envelopes.

"The anthropometric accommodation envelopes for each aircraft are captured in WebPASS," said Whitestone. "All prospective candidates measurements are put into this web-based software and the aircraft that they are able to safely operate are indicated."

Waiver packages are then coordinated through a partnership between the AETC surgeon general and 19th Air Force officials, who are responsible for all of the Air Force's initial flying training.

This waiver process is not new, but AETC officials want to ensure those who dream of flying for the USAF have all the facts and do not self-eliminate because they think they are too tall or too short.


Related Links
Air Force Research Laboratory
Aerospace News at SpaceMart.com


Thanks for being there;
We need your help. The SpaceDaily news network continues to grow but revenues have never been harder to maintain.

With the rise of Ad Blockers, and Facebook - our traditional revenue sources via quality network advertising continues to decline. And unlike so many other news sites, we don't have a paywall - with those annoying usernames and passwords.

Our news coverage takes time and effort to publish 365 days a year.

If you find our news sites informative and useful then please consider becoming a regular supporter or for now make a one off contribution.
SpaceDaily Monthly Supporter
$5+ Billed Monthly


paypal only
SpaceDaily Contributor
$5 Billed Once


credit card or paypal


AEROSPACE
Lockheed Martin awarded $18M for F-35 support for Australia, UK, Canada
Washington (UPI) Dec 13, 2019
Lockheed Martin has received an $18 million contract modification for maintenance and operation of the support center that tests the F-35 aircraft for three partner nations. The deal will fund maintenance and operations at the Australia, Canada, United Kingdom Reprogramming Laboratory at Eglin Air Force Base in Florida. It extends a previous $559.5 million contract awarded in 2016 for hardware and software upgrades and engineering support for the F-35 Lightning II Joint Strike Fighter fo ... read more

Comment using your Disqus, Facebook, Google or Twitter login.



Share this article via these popular social media networks
del.icio.usdel.icio.us DiggDigg RedditReddit GoogleGoogle

AEROSPACE
Beleaguered Boeing's Starliner returns early from failed mission

From take off to landing, NASA and Boeing work together to launch Commercial Crew

Astronauts "Train Like You Fly" in Boeing Starliner Simulations

Boeing to send 'Rosie' to space in key crewless mission

AEROSPACE
SpaceX launches JCSAT 18 Kacific 1 communication satellite

Equipment installation for Angara Launch Pad at Russia's Vostochny to start Sunday

Scaling up for the next generation of rocket technology Down Under

Jeff Bezos's Blue Origin rocket makes 12th test flight

AEROSPACE
Mars 2020 Rover Completes Its First Drive

Lockheed Martin delivers Mars 2020 rover aeroshell to launch site

Two rovers to toll on Mars Again in 2020

Scientists map a planet's global wind patterns for the first time, and it's not Earth

AEROSPACE
China's Xichang set for 20 space launches in 2020

China sends six satellites into orbit with single rocket

China launches satellite service platform

China plans to complete space station construction around 2022: expert

AEROSPACE
Iridium Continues GMDSS Readiness with Announcement of Launch Partners

Nilesat-301 satellite to be built by Thales Alenia Space

SpaceChain sends blockchain tech to ISS

SpaceChain sends blockchain tech to ISS for Fintech market

AEROSPACE
Solving the challenges of long duration space flight with 3D Printing

Calling radio amateurs: help find OPS-SAT!

New laser technique images quantum world in a trillionth of a second

OneWeb to use advanced grappling tech from Altius Space Machines

AEROSPACE
Europe's exoplanet hunter blasts off from Earth

Europe's exoplanet hunter reaches orbit around Earth

CHEOPS space telescope to investigate extrasolar planets

Short-lived light sources discovered in the sky

AEROSPACE
NASA's Juno navigators enable Jupiter cyclone discovery

The PI's Perspective: What a Year, What a Decade!

Reports of Jupiter's Great Red Spot demise greatly exaggerated

Aquatic rover goes for a drive under the ice









The content herein, unless otherwise known to be public domain, are Copyright 1995-2024 - Space Media Network. All websites are published in Australia and are solely subject to Australian law and governed by Fair Use principals for news reporting and research purposes. AFP, UPI and IANS news wire stories are copyright Agence France-Presse, United Press International and Indo-Asia News Service. ESA news reports are copyright European Space Agency. All NASA sourced material is public domain. Additional copyrights may apply in whole or part to other bona fide parties. All articles labeled "by Staff Writers" include reports supplied to Space Media Network by industry news wires, PR agencies, corporate press officers and the like. Such articles are individually curated and edited by Space Media Network staff on the basis of the report's information value to our industry and professional readership. Advertising does not imply endorsement, agreement or approval of any opinions, statements or information provided by Space Media Network on any Web page published or hosted by Space Media Network. General Data Protection Regulation (GDPR) Statement Our advertisers use various cookies and the like to deliver the best ad banner available at one time. All network advertising suppliers have GDPR policies (Legitimate Interest) that conform with EU regulations for data collection. By using our websites you consent to cookie based advertising. If you do not agree with this then you must stop using the websites from May 25, 2018. Privacy Statement. Additional information can be found here at About Us.